Chapter 1 Product Installation
Parts identification
Chapter 2 Product Usage
Use of the main body
Insert the power cord plug into the power socket, and press the on/off button to turn on the machine.
Press the temperature button and speed button to adjust the air temperature and air speed:
Temperature button:
The air temperature is defaulted to be the same as the last use, you can press the temperature button to adjust the mode. There are 3 modes of high, medium, and low :
High temperature:
Three air temperature indicators turn red
Medium temperature:
Two air temperature indicators turn red
Low temperature:
One air temperature indicator turns red
Speed button:
The air speed is defaulted to be the same as the last use. You can press the speed button to adjust the mode. There are 3 modes of high, medium, and low :
High speed:
Three air speed indicators turn red
Medium speed:
Two air speed indicators turn red
Low speed:
One air speed indicator turns red
Cold air/hot air switching
Long-press the air temperature button for 3 seconds to switch to cold air mode. The air temperature indicator will turn off. Under cold air mode, press the temperature button to switch to hot air mode; the default air temperature is the same as the previous hot air mode.
Memory function
The working mode of the device defaults to the same as the last use.
Use of accessories
Please install the accessories with the machine turned off, and do not load or unload the high-temperature accessories during use to avoid burns.
Note
1. After use, allow the accessories to cool down and then load or unload them by holding the cover, knob, or lever at the top of each accessory to avoid burns.
2. During use, please keep a distance of over 10cm between the air inlet and your hair to avoid your hair being drawn into the machine, and keep a distance of over 3cm between the air outlet and your hair to avoid hair burns.
Fast dry nozzle
Fit the fast-dry nozzle into the main machine, power up, and it's ready for fast hair drying.
Two-way curler
Assemble the two-way curler to the main machine. Twist the top of the curler to switch to left or right curls. Turn on the machine, choose high temperature and high speed mode, take out a wisp of hair, hold the curler close to the hair tip, and let the hair follow the airflow to wrap around the curler. Keep high temperature curling for 10 seconds, and then long-press the temperature button for s 3 seconds to switch to cold air mode, keep cold air styling for 5-10 seconds.
Fluffy nozzle
Users can curl the roots of collapsed hair or bangs to create volume. Assemble the fluffy nozzle to main machine, powered on and heat the nozzle in high
temperature and high speed mode for 10 seconds. Then remove the nozzle and wrap the hair roots around the nozzle to create the desired volume. Keep for 5 to 10 minutes and then remove the fluffy nozzle from the hair.
Removal of accessories
After use, press the on/off button to turn off the machine, unplug the power cord, and push down the release button to remove the accessories. (The picture is based on a two-way curler.)
Chapter 3 Cleaning and Maintenance
Note: Before cleaning, please remove the plug first. Please use the towel, cotton swab, or toothbrush to clean the air inlet and air outlet regularly, and rotate the air inlet bottom cover to clean the metal filter. Do not press or rub the air inlet and air outlet with your fingernails or sharp objects to avoid damaging the product. Do not use alcohol, nail polish remover, or detergent to clean the product, as this may cause malfunction, breakage, or discolouration.
